SMP Negeri 2 Teluk Kuantan

Lingkungan yang Berbudaya, Hijau, Berbunga dan Berbuah

cara reset printer canon ip 2770

Tinggalkan komentar

Cara reset canon ip 2770

 

Sebenarnya produsen printer canon sudah mengikutsertakan petunjuk penggunaan manual atau helpdesk nya. Disana menyatakan jika tinta sudah habis cartridge harus diganti dengan baru. Karena untuk menjaga kualitas hasil print out. Namun hampir semua orang dengan alasan ekonomis lebih memilih menyuntikkan tinta ke cartridge dari pada membeli cartridge baru sesuai dengan petunjuk produsen printer canon, mengingat harganya tidak bisa dibilang murah.

 

Cara me-reset canon ip2770 terbaru – tindakan suntik tinta biasanya berakibat printer menjadi error, salah satunya adalah error 5200. Error 5200 ini diakibatkan oleh perbedaan inisialisasi cartridge yang terpasang sebelum dilepas dari tempat cartridge printer canon dan setelah dipasang kembali, hal ini membuat printer tidak bisa digunakan untuk mencetak, meski printer saat dihidupkan dalam keadaan normal, namun setelah diberikan perintah mencetak maka printer yang tadinya ready (tombol power menyala normal) tiba – tiba berubah menjadi berkedip bergantian dengan lampu resume yang berwarna orange.

 

Ketika printer canon ip2770 tidak bisa mencetak kita harus melakukan reset printer untuk menghilangkan error 5200, agar printer bisa digunakan untuk mencetak dengan normal.

 

Langkah – langkah me-reset printer canon ip2770

 

Berikut ini adalah langkah – langkah atau tips untuk melakukan reset printer secara manual yang dapat dilakukan sendiri di rumah atau di kantor dan tempat kerja anda.

  1. Posisi printer harus dalam keadaan mati (kalau printer sudah hidup, silahkan dimatikan terlebih dahulu)
  2. Tekan dan tahan tombol resume kurang lebih 2 detik, dilanjutkan dengan tekan tombol power
  3. Lepas tombol resume (tombol power masih tetap ditekan)
  4. Tekan tombol resume berulang kali sebanyak 5 kali dan lepas kedua tombol (power & resume)
  5. Tunggu beberapa detik hingga lampu power menyala normal (tidak berkedip – kedip)
  6. Matikan printer sampai benar – benar mati/off
  7. Setelah printer benar – benar mati, kemudian pencet tombol power dan lampu berwarna hijau, printer sudah bisa digunakan.

 

The reset method work for canon printers that using pg-40 and cl-41 cartridges. After doing this reset method your printer will not display low ink notification anymore and will not show error code “e4″ or “e5″. This method takes from indoreset yahoo group and prepared by choy.

Here how, the method to reset ink level notification:

  1. Push “resume” for 5 seconds for canon ipxxxx. For canon mpxxx you must enter to service mode.
  2. Push power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push start/reset by step 2 continue wait display shown “0″
  5. Push + change display from “0″ to “1″
  6. Push color button 2 times
  7. Push power switch again , printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again

 

Enter to service mode for canon mpxxx

  • With the printer powered off but connected to a power source, press the power button while pressing and holding the stop/ reset button.
  • When the power is lit, press the stop/reset button two times while pressing and holding the power button.
  • When releasing the power button and the stop / reset button (regardless of order), the printer will move into a service mode. (waiting for menu selection)

Note: sorry, this method untested.

 

Canon pixma ip2770 are classified into photo printers. This printer is very suitable for use at home. Results in getting the equivalent of lab quality photos. The speed  of this printer quickly spelled out that is about 7 ipm for mono and the 4.8 ipm for color and for 4r-sized photo takes 55 seconds. Resolution of canon pixma ip2770 printer at 4800 x 1200dpi (max). Still uses usb 2.0 connectivity and the type cartridge using pg-810, cl-811 (pg-810xl, cl811xl optional). For this printer weight of 3.4 kg with dimensions of 445 x 250 x 130mm.

 

If a lights blink on the power and resume button alternately and it will show an error 5b00. It means that your ink absorber inside the printer is almost full. In order to solve this you need to clear or reset the counter protection of your printer. To do this, follow this steps.

 

First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter at the bottom of this post.

 

First steps:  entering service mode

You have to enter in service mode in order to used the resetter. To do that follow this procedure,

 

1. Turn off the printer without pulling the power cords.

2. Hold down resume button and press power button.

3. Keep holding down power button and let resume button go.

4. Then press resume button 5 times then let both buttons go.

5. You will notice that the alternate blinking error is gone, this means that the printer is in service mode state.

 

Second steps: using the resetter

 

1. After you download the resetter, extract it and double click “servicetool.exe”

2. Press the “main” button, then press “eprom clear” button if a pop-up appear just click ok

5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. And its done!

 

About these ads

Author: smpn2tlk

Administrator SMPN 2 Teluk Kuantan

Berikan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Logout / Ubah )

Twitter picture

You are commenting using your Twitter account. Logout / Ubah )

Facebook photo

You are commenting using your Facebook account. Logout / Ubah )

Google+ photo

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

Ikuti

Get every new post delivered to your Inbox.

Bergabunglah dengan 137 pengikut lainnya.